Electrical Switchboard Runner Mat - sold by the Foot

In stock
1 Week Lead Time
Part #
KV256
$19.59

Standard narrow corrugated surface is completely tested through- out. Conforms to ANSI/ASTM D178 J6.7 Type II Class 2. Stays in place, is slip resistant. With care, lightweight carts can be used over this runner.

Meets Dielectric Test Volt, RMS AC 30,000; Proof Test Volt, RMS AC 20,000. Recommended maximum use Volt, RMS AC 17,000.

Fully meets ASTM specifications branded on back. Black color only. Available in standard rolls or cut to exact length desired.

Sold by the foot

Electrical Switchboard Runner Mat - sold by the Foot is available to buy in increments of 1

Standard narrow corrugated surface is completely tested through- out. Conforms to ANSI/ASTM D178 J6.7 Type II Class 2. Stays in place, is slip resistant. With care, lightweight carts can be used over this runner.

Meets Dielectric Test Volt, RMS AC 30,000; Proof Test Volt, RMS AC 20,000. Recommended maximum use Volt, RMS AC 17,000.

Fully meets ASTM specifications branded on back. Black color only. Available in standard rolls or cut to exact length desired.

Stock No. Lin. Ft. to Roll Approx. Size Approx. Wt. Lin. Ft.
KV256 75 1/4" x 36" 4.4 lbs.

Sold by the foot

More Information
Part # KV256
Description

Standard narrow corrugated surface is completely tested through- out. Conforms to ANSI/ASTM D178 J6.7 Type II Class 2. Stays in place, is slip resistant. With care, lightweight carts can be used over this runner.

Meets Dielectric Test Volt, RMS AC 30,000; Proof Test Volt, RMS AC 20,000. Recommended maximum use Volt, RMS AC 17,000.

Fully meets ASTM specifications branded on back. Black color only. Available in standard rolls or cut to exact length desired.

Stock No. Lin. Ft. to Roll Approx. Size Approx. Wt. Lin. Ft.
KV256 75 1/4" x 36" 4.4 lbs.

Sold by the foot

Short Description

Standard narrow corrugated surface is completely tested through- out. Conforms to ANSI/ASTM D178 J6.7 Type II Class 2. Stays in place, is slip resistant. With care, lightweight carts can be used over this runner.

Meets Dielectric Test Volt, RMS AC 30,000; Proof Test Volt, RMS AC 20,000. Recommended maximum use Volt, RMS AC 17,000.

Fully meets ASTM specifications branded on back. Black color only. Available in standard rolls or cut to exact length desired.

Sold by the foot

Availability 1 Week Lead Time
Manufacturer R. C. Musson
Write Your Own Review
You're reviewing:Electrical Switchboard Runner Mat - sold by the Foot
Your Rating
Electrical Switchboard Runner Mat - sold by the Foot