R. C. Musson | Brown

Ideal for residential and light commercial applications. This is one of our favorite stair treads for the do-it-yourselfers. Easy to install with very easy cutting, ideal for basement steps. Lightweight, economy gauge with a round rib design. Curve-around nose fits round or square nose steps.

Specifications:

• #334 Koroseal Vinyl economy stair treads
• Round rib surface design
• Thickness: 5/64"
• Depth: 10"
• Curve-around nose
• Sizes available: 18", 24", 36", 48" or 72"
• Colors available: Brown, Black

This is a very good stair tread, but not one of our favorites. The nose on this vinyl stair tread is difficult to work with in some applications. Because the nose has substantial material (thickness) it is tricky to work with. We can send you a sample, so you can see how it fits on your step. It is our lowest cost protection for stairs of homes, duplexes and apartments. Features extra heavy snap-on nose that fits either square or curved nose wood steps that are between 3/4" and 1-1/8" thick.

SPECIFICATIONS:

• Koroseal vinyl rib design stair treads
• Thickness: 1/8"
• Depth: 9-5/8"
• Snap on nose
• Sizes available: 18", 24", 30", 36", 42", 48" or 72"
• Colors available: Brown, Black

This is another of our favorites. This vinyl stair tread features a longer nose, so the front edge of the step is covered on a standard 2 x 12 plank step. This tread is idea for the type A personality person how wants everything perfect and covered. Applications for this tread are residential, multi-family dwellings, apartment houses, and low income housing. These treads are easy to cut, clean and install. They are designed for interior use.

Features:

• Extra long square nose
• Easy installation
• Easy clean
• Meets Fed. Specs. RR-T-650E Type B
• Contains no asbestos fiber
• Made of first quality homogeneous vinyl
• Color throughout thickness
• Free from imperfections which might lessen serviceability

Specifications:

• 355 Koroseal vinyl rib design stair treads by Musson Rubber
• Thickness: 1/8"
• Depth: 12"
• Nose: 1-3/4"
• Sizes available: 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96"
• Colors available: Brown, Sand, Gray, Black

Vinyl Stair Treads 375 Series Medium Duty

Medium Duty is misleading on this vinyl stair tread. The 375 is very heavy duty, designed for many years of use. Ideal for use in apartments, urban renewal housing, housing for the elderly and housing projects. Lower initial cost, ease of installation and cleaning, and long service appeals to owner and builder. They are designed for interior use.

Specifications:

• 375 Koroseal vinyl rib design stair treads
• 3/16" thick, 12" deep, 1-1/4" square (or curved) nose
• contains no asbestos fiber
• made of first quality homogenous vinyl, color throughout thickness
• free from imperfections which might lessen serviceability
• Meets Fed. Specs. RR-T-650E Type B.
• Select standard length of 18", 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96"
• Select standard solid colors of Brown, Sand, Gray, or Black.

VINYL STAIR TREADS 400 SERIES HEAVY DUTY

Our heaviest duty vinyl stair tread. At 1/4" thick at the nose it will last the longest of all our vinyl stair treads. Easily installs over concrete, metal, wood, and terrazzo. They are designed for interior use.

SPECIFICATIONS:

No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Meets Fed. Specs. RR-T-650E Type B. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.

Vinyl Stair Treads GS365 with Grit Strip

This is one our highest volume vinyl stair treads. Heavy duty to stand up to most applications with the safety of inlaid grit strips.

SPECIFICATIONS:

Furnish and install No. GS365 Koroseal Vinyl Stair Treads
Grit-Strip rib design stair treads; 7/32" thick, 12" deep; 1-1/4" square nose; two black* 1" wide abrasive Grit-Strips inlaid in tread, 1" from front edge, spaced 1-1/4" apart; contains no asbestos fiber; made of first quality homogenous vinyl, color throughout thickness; free from imperfections which might lessen serviceability. Meets Federal Specs. RR-T-650E Type B. Select standard length of 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid color of Brown or Gray.

VINYL STAIR TREAD 405CR SERIES COVED RISERS
The 405CR Coved Riser is used for the back of the step, on the riser. Though they are not required, they make your project look complete and clean.

SPECIFICATIONS:
Furnish and install No 405CR Koroseal vinyl coved stair riser; 1/8" thick, 7" high with 5/8" toe; ribbed back. Select standard length of 18", 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid color of Brown, Sand, Gray or Black.

A tough mineral-coated waterproof non-slip surfacing with a pressure sensitive adhesive back. Helps grip foot traffic, preventing slipping, easy to apply; use inside or outside. Rectangular sizes with rounded corners or in rolls cut to any length. We suggest priming surfaces with Musson Grit Strip Adhesive before applying. Ideal for entranceways, ramps and walkways, stairways, heavy traffic areas, work areas, loading docks, recreational vehicles, boats & docks, cafeterias, kitchens, coolers, around drinking fountains and ice machines.

Improve safety and prevent worn carpet edges on steps; for new or renovation work. Butt 1/4" to 3/8" thick carpet against both the top and bottom lips of butt-type carpet nosing. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.

SPECIFICATIONS:

Furnish and install No.140 Koroseal Vinyl Ribbed Carpet Nosing; 3-1/8" deep; 2-1/2" nose depth; square adjusta-nose. Lap 5/16", 1/4" or 3/8" carpet over lip on both the step and riser. Select from standard colors of black, brown.

Shipping:   Due to shipping costs, this product is shipped in two 48" sections

Ribbed Koroseal Vinyl lap-type nosing for front edge of stages, bowling lane steps, platform-like floors and bar foot rests. Form fitting adjusta-nose; has a 7/8" lip to allow 1/8" flooring to lap over back edge. Standard 8’ lengths. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.

SPECIFICATIONS:

Furnish and install No.105 Service Weight Koroseal Vinyl Ribbed Lap-Type Nosing; 2-3/4" deep; 1-1/2" nose depth; square adjusta-nose. Lap 1/8" flooring over the back lip to butt against ribbed design. Select from standard colors of black or brown.

Shipping:   Due to shipping costs, this product is shipped in two 48" sections

Ribbed Koroseal Vinyl butt-type nosing for front edge of stages, bowling lane steps, platform-like floors and bar foot rests. Grooved cutting guides provide "cut-offs" to match flooring thickness. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.

SPECIFICATIONS:

Furnish and install No.101 Heavy Duty Koroseal Vinyl Ribbed Butt-Type Nosing; 3-1/2" deep; 1-5/16" nose depth; square adjusta-nose. Cut nosing at proper guide to butt against 1/8" (or 3/16" or 1/4") flooring. Select from standard colors of black or brown.

Shipping:   Due to shipping costs, this product is shipped in two 48" sections