Stair Tread Adhesives
Selling Stair Tread Adhesives for the past 35 years.
Stair Tread Adhesives for Rubber Stair Treads, Vinyl Stair Treads Stairwell Landing Tiles, Grit Tape and Entrance Mats
-
RCM510 Acrylic Wet-Set Adhesive
The RCM510 is an acrylic wet-set adhesive used for the permanent installation of dimensionally stable Solid Vinyl Tile, LVT, LVP, approved Rubber, Resilient Quartz flooring, and stair tread products over porous and non-porous substrates in indoor applications. It is a low odor, non-flammable, solvent-free and ready to use product.
Access Times:
Heat Welding ≥ 24 Hours
Light Foot Traffic ≥ 24 Hours
Heavy Foot Traffic and Rolling Loads ≥ 48 Hours
Maintenance ≥ 72 Hours1 Gallon covers approximately 160 square feet.
RCM510- -
Stair Tread Adhesive Non Solvent Based 300 Series
A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble. One gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.
300ADH -
Stair Tread Installation Tape
Stair Tread Installation Tape
Speeds installation of vinyl stair treads without the mess! Tape is sold in 4" wide rolls of 164 feet.
We recommend two strips of tape per tread. One on the nose and one at the back. As an example for the 36" tread you would need 72" or 6' of tape.
AT327 -
400 Neoprene Stair Tread Contact Adhesive Cement
For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps. A rapid drying, long range contact cement; specially formulated for Musson stair coverings. Brush on application; use on back of treads and back of nosing. Contains solvents, extremely flammable. 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 5 gallon containers.
If ordering the gallon or 4 gallon pail, it will ship via freight truck. If you would prefer something that ships Fed Ex Ground, please order the 300 Stair Tread Adhesive HERE.
400AHD -
560 Series Enviromental Safe Rubber Flooring Adhesive
For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors. May also be used with sanded back molded rubber stair treads. Not recommended where excessive moisture exists; Non-Carcinogenic; Non-Toxic; safe for the environment and freeze thaw stable. See label for complete instructions. Ready to trowel in 1 gallon or 4 gallon cans. Covers 150 square feet per gallon.
560 -
GSA3 Adhesive Backed Grit Tape Cement
Use adhesive where Grit Strip is applied to porous surfaces such as wood or concrete. Grit Strip adhesive is recommended as a sealer; will give a better, longer lasting bond. Recommended application temperature is 60 degrees and above. One quart covers approximately 50 square feet (single coat) of Grit Strip; available in quart and pint units.
GSA3 -
Fluff-Cord Tile Adhesive
Adhesive specifically designed for the TT-12 Fluff Cord Tile.
1 gallon covers approximately 100 square feet
TT390 -
320 Carpet Tile Adhesive
320 CARPET TILE ADHESVIE
A special latex emulsion pressure sensitive adhesive formulated for installation of modular carpet tiles or carpet matting. Adhesive is non-flammable, water resistant and has excellent resistance to vinyl plasticizer migration. Adhesive remains tacky for an extended period - allows tile to be picked up and replaced without affecting adhesive. Remove tiles from floor more easily than with conventional adhesives, simplifying reinstallation of tile sections or a complete area.
Covers 200 to 300 square feet per gallon
Sold in 1 or 4 Gallon Pails320ADH