Nosing and Corner Guard
Nosing and Corner Guards
Selling Nosing and Corner Guards for the past 25 years.
Make sure you click on the Nosing and Corner Guards Image or Text for more
dimensional and pricing information.
-
Aluminum Nosing 2" with Abrasive Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N- -
Ribbed Koroseal Vinyl Carpet Nosing No. 140
Improve safety and prevent worn carpet edges on steps; for new or renovation work. Butt 1/4" to 3/8" thick carpet against both the top and bottom lips of butt-type carpet nosing. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.
SPECIFICATIONS:
Furnish and install No.140 Koroseal Vinyl Ribbed Carpet Nosing; 3-1/8" deep; 2-1/2" nose depth; square adjusta-nose. Lap 5/16", 1/4" or 3/8" carpet over lip on both the step and riser. Select from standard colors of black, brown.
Shipping: Due to shipping costs, this product is shipped in two 48" sections140 -
Ribbed Koroseal Vinyl Butt Type Nosing No 101
Ribbed Koroseal Vinyl butt-type nosing for front edge of stages, bowling lane steps, platform-like floors and bar foot rests. Grooved cutting guides provide "cut-offs" to match flooring thickness. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.
SPECIFICATIONS:
Furnish and install No.101 Heavy Duty Koroseal Vinyl Ribbed Butt-Type Nosing; 3-1/2" deep; 1-5/16" nose depth; square adjusta-nose. Cut nosing at proper guide to butt against 1/8" (or 3/16" or 1/4") flooring. Select from standard colors of black or brown.
Shipping: Due to shipping costs, this product is shipped in two 48" sections
G101